CIP200 Drill Free Peened Grab Bar

Drill Free Peened Grab Bars - Discontinued

4 Review(s) Write a Review

Your Price: $104.95

No drilling required for installing these textured grab bars for bathroom safety.

Questions about this item? Ask here.

Product ID: CIP200

Availability:

Not for Sale

Choose size: *

Description
Product Features
Customer Reviews
Questions and Answers

The Drill Free Peened Grab Bars are German engineered safety grab bars with a patented no drilling required mounting technology for tile, ceramic, marble, granite, stone, glass, brick, metal. These easy to install grab bars are ADA approved for safety for users with arthritis.

The Drill Free Peened Grab Bars feature a patented mounting technology that does not require drilling holes in high-quality surfaces like tile or natural stone for installation. The patented hole-free fastening system has experienced a growing success in a number of European markets. Translated from German, "nie wieder bohren" means "no drilling required."

The Drill Free Peened Grab Bars mounting system is surprisingly simple and can be installed in just minutes. It combines the strength of a high-performance, single-component commercial adhesive used in the aircraft and automotive industries with a patented adapter to form a permanent bond on smooth and rough, hard, flat surfaces, even concrete. The nontoxic commercial adhesive has properties that make it practical to use in both indoor and outdoor environments. The adapters accommodate a precise amount of adhesive and provide enough air contact to ensure that the adhesive hardens evenly. Finally, the mounting system was also designed to be reversible. In most cases, it can be removed leaving the hard surface intact. The system meets ADA testing requirements for dead weight pull for use with grab bars.

Drill Free Peened Grab Bars are available in several lengths including 12 inch, 18 inch, 24 inch, 30 inch, 36 inch, and 42 inches. Other finishes available by special request.

Drill Free Peened Grab Bars Product Instructions

Drill Free Peened Grab Bars Specifications:

Finish: Polished stainless steel with textured center grip.
Available Lengths: 12, 18, 24, 30, 36, and 42 inches.
Diameter: 1.5 inches.
Material: 18 gauge 304 grade stainless steel.
Note: Adhesive will not bond to plastered, wall-papered, veneered, or painted surfaces.
Weight limit: 250 pounds.
Other colors available: Brushed stainless, Bright white, Atlas bronze textured, Black bronze, Brass flair.

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

5.0

nice quality

Installed these for my grandfather to help stabilize when getting in and out of the shower, he has to step over the tub wall. Have been installed for a year with no issues. We didn't want to risk drilling through the tile so we went with these. Installation was easy and quick; just make sure to clean the surface well so the epoxy can make a good bond.

Did you find this helpful? 37 of 37 Found Helpful

Reviewed by: Banks from MS on 9/10/2015

Strong, easy to install, no drilling required.

This grab bar works well where you can't drill. I had used this at another residence for over 4 years, so I purchased another. Very sturdy.

Did you find this helpful? 29 of 29 Found Helpful

Reviewed by: Gene from LA on 10/29/2018

nice product

The way the studs in our bathroom are laid out there is no way to mount a regular bar into them. Removing the tile to reframe the wall just wasn't feesible. This seemed like a good alternative. I looked up a video and followed the instructions given. Install was easy and all seems sturdy but time will tell.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Jim from Maryland on 12/8/2021

Home owner

So far, excellent service, excellent product, excellent installation instructions.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Stuart Honse from Tahoe City, CA on 11/5/2021

Q: Are these Americans with Disabilities Act (ADA) approved?

Asked by: Roy - 7/28/2021

A: Yes

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Andy (7/28/2021)

Submit an answer

Q: Does the length of the grab bar include the mounting part or just the hand area of the bar?

Asked by: Grady - 7/5/2021

A: The Drill Free Peened Grab Bars come with the mounting kit.

Was this answer helpful? 0 of 1 Customer(s) found this Answer helpful.

Answer provided by: Andy (7/5/2021)

Submit an answer

Q: Can grab bars be installed on fiberglass?

Asked by: Cindy - 12/6/2020

A: This system is designed for Tile, Natural Stone, Glass, Metal and Concrete only.

Was this answer helpful? 0 of 1 Customer(s) found this Answer helpful.

Answer provided by: Amy (2/23/2021)

Submit an answer

Q: can this grab bar be mounted on the side of a wooden bathroom vanity?

Asked by: Patty - 11/11/2020

A: This system is designed for Tile, Natural Stone, Glass, Metal and Concrete only.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Amy (2/23/2021)

Submit an answer

Q: can it be used in a fiberglass shower stall?

Asked by: jeff - 6/24/2020

A: Yes, it should.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Andy (6/24/2020)

Submit an answer

Q: Where do you select color?

Asked by: Michael - 5/18/2020

A: You need to call or email us to request a different color for your order.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Andy (5/18/2020)

Submit an answer

Q: Can it be removed? How much damage to shower wall after it is removed?

Asked by: Sandra - 5/8/2020

A: Yes. We know of no load-bearing material that would be harmed by the chemical substances in the nie wieder bohren adhesive. To completely remove the silicone-like adhesive from the gaps and pores of rough surfaces, it is necessary to use a silicone remover, pure alcohol and a coarse brush.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Amy (2/23/2021)

Submit an answer

Q: How do I measure for this item? Is it supposed to be horizontal, diagonal, or vertical?

Asked by: Debbie Devendorf - 10/16/2019

A: The Drill Free Peened Grab Bar can be mounted in any direction that fits your need best. Be sure to follow the directions exactly. The grab bar comes in six lengths: 12, 18, 24, 30, 36, and 42 inches.

Was this answer helpful? 2 of 2 Customer(s) found this Answer helpful.

Answer provided by: Andy (10/16/2019)

Submit an answer

Q: How is this bar attached

Asked by: Barbara - 4/22/2019

A: It combines the strength of a high-performance, single-component commercial adhesive used in the aircraft and automotive industries with a patented adapter to form a permanent bond on smooth and rough, hard, flat surfaces, even concrete.

Was this answer helpful? 4 of 4 Customer(s) found this Answer helpful.

Answer provided by: Andy (4/22/2019)

Submit an answer

Questions about this item? Ask here.

Drill Free Brushed Stainless 1.5D Grab Bars

$84.95

In Stock

Select Options

Drill Free Peened Grab Bars - Discontinued

Choose Options

Drill Free Peened Grab Bars Specifications:

Rating Snapshot

Average Customer Ratings

Q: Are these Americans with Disabilities Act (ADA) approved?

Q: Does the length of the grab bar include the mounting part or just the hand area of the bar?

Q: Can grab bars be installed on fiberglass?

Q: can this grab bar be mounted on the side of a wooden bathroom vanity?

Q: can it be used in a fiberglass shower stall?

Q: Where do you select color?

Q: Can it be removed? How much damage to shower wall after it is removed?

Q: How do I measure for this item? Is it supposed to be horizontal, diagonal, or vertical?

Q: How is this bar attached

Other Helpful Arthritis Products

Recently Viewed Items